|Maximum fill gap||6mm|
|Air pressure resistance||10Mpa|
Initial curing:15-20minutes Totally curing:≤24hour
DY-M588 is kind of silicone sealant adhesive with high seal strength and excellent temperature resistance. It can replace kinds of asbestos pad, rubber gasket, cork pad, paper pad.
It is widely used on sealing of joint surface for planar flange, pipe adapter, cover plate of mechanism, car, motorbike, electromechanical and chemical equipment, instrument etc.
1. Cleaning the oil from surface and take the gaskets away from it.
2. Using the top of cap to pierce the nozzle to let gel come out and coating them evenly on surface, the thickness is about 1.6-3.2mm from outer edge to inner edge.
3. Initial curing is about 15-20 minutes, 10 hour or 24 hours will reach good sealing effect under the room temperature 25 °c
4. After finished work, cover the tube and wash hands with water, also clean tools.
1.Keep away from the reach of children
2.Use in well ventilated,but not take orally,due
To its acrylic smell
3.Store in cool,dry and draughty place,and keep
Away from heat and flame source.
4.Don’t exchange the caps of A and B.Certifications
Our Main Products
2.Epoxy resin adheisve
4.Chloroprene Rubber Adhesive
7.Super GluePackaging & Shipping
24 cards/inner box
12 cards/inner box
1.FOB Terms(FOB GUANGZHOU/SHANGHAI/CHANGSHA) or EX Works.
3. 24 hours after-sale service.
4.Customized design and brand is ok.
Copyright © 2017 - 2018Jinan Mass Food Machine CO.,Ltd All Rights Reserved