Before The Curing
|Appearance||Gray Fluid||White Fluid|
|Operable Time||30~120(min) (Adjustable)|
After The Curing
|Flammability Rating||UL94 V-0|
•20kg/set(A10kg+B10kg), packaging with bucket.
|Widely used in various types of electronic components, play the role of heat conduction, fire retardant, waterproof.|
|Powr Equipment||Power Supply||Junction Box|
|Powr Equipment||Power Supply|
Be used in harsh environments for a long time
The silicone sealant has the performance of superior high and low resistance, excellent insulation, high stability with thermal oxidation and ozone. It can be widely used in aerospace, automotive electronics, office equipment, construction and so on.
Effectively prolong service life of electronic components
Silicone sealant has superior thermal conduction and bonding property.it not only can fixed the electronic components, make heat transferring to the heat sink, to prevent overheating of electronic components to avoid resulting in break down, which can improve the service life.
ZS-GF-5299E is a low viscosity two-component addition cure silicone sealant, that can be cured at room temperature or heat cure, the higher the temperature, the faster the curing. This product does not produce any byproducts during the curing process, which can be applied to PC (poly-carbonate), PP, ABS, PVC and other surface of metal. Complied with the ROHS, REACH of EU directive.Packaging & Shipping
1. 20kg/set(A10kg+B10kg), packaging with bucket.
2. 1 year shelf life if stored below 25 ℃, when the product passed its expiration date, it should be confirmed without abnormal phenomenon, then that can be used.
3. These products don't belong to dangerous goods, so they can be transported as normal chemicals. But be careful of leakage.Our Services
1. What is the main application about it?
Preparing: Stir completely A and B in container each other.
Mixing: A and B should be fully mixed according to the weighting ratio. Add B to A. Stirring(stir the glue dedicated blade) and mixing. Note that: should be mixedthoroughly when mixing the wall rubber of container into the plastic material.
De-airing: After mixing which should vacuum degassing for 1-3 minutes.
Potting: The mixture should be poured into the product as soon as possible, in order to avoid thickening and resulting in poor fluidity.
Curing: Heat curing or at room temperature curing. The higher the temperature, the quicker curing . The temperature is low, the curing time will be extended either. In winter, it will take a long time to cure, so suggest that heating curing. It is cured for 15 minutes at 80 ° C ~ 100 ° C, about 12 hours at room temperature.
A. incompletely cured condensation type silicone rubber.
B. amine (amine) curable epoxy resin.
C. ash welding (solder-flux).
Copyright © 2017 - 2018Jinan Mass Food Machine CO.,Ltd All Rights Reserved